The right loudness for a DJ mix going to SoundCloud, Mixcloud or YouTube is -14 LUFS integrated, with the loudest peaks kept at least 1 dB below full scale. One master at that level works on every one of them. This guide shows where that number comes from, what each platform actually does with your upload, where the platforms differ, and what to do when the same mix is also going to a club system.
The short answer in 30 seconds
Master your mix to -14 LUFS integrated and keep the peaks below -1 dB. That matches SoundCloud's and Spotify's own published guidance and YouTube's playback level. Mixcloud publishes no loudness target, so -14 is the safe choice there too, and it means one file serves every platform you upload to. If your master is louder than -14 LUFS, SoundCloud and Spotify both ask for a little more room: peaks below -2 dB. A mix for a club PA or a USB stick is a different job, because nothing on that playback chain turns it down.
The targets, platform by platform
SoundCloud: -14 LUFS integrated, peaks below -1 dB, or below -2 dB if the master is louder than -14. SoundCloud turns playback up or down to an even level, so your mix may not play at the level it was mastered at.
Mixcloud: no published loudness target. Its help centre covers formats and file size only. Aim for -14 LUFS, peaks below -1 dB.
YouTube: plays back at around -14 LUFS and turns louder uploads down to meet it. Do not count on it turning a quiet mix up.
Spotify: -14 LUFS on its normal setting, with Loud (-11) and Quiet (-19) options for listeners. Same peak advice as SoundCloud: below -1 dB, or below -2 dB on a louder master.
Apple Music: -16 LUFS, with Sound Check on by default on iPhone. A -14 master is simply turned down by about 2 dB, which costs it nothing.
Club systems and USB sticks: no normalisation at all. The file plays at exactly the level it was exported at, which is why club masters are made louder.
What "normalisation" actually does to your mix
Loudness normalisation is the platform measuring how loud your upload is across its whole length and then adjusting the playback volume so it sits level with everything else. It does not change your file. It changes the volume knob on the listener's side.
That has two consequences for a DJ mix, and they pull in opposite directions.
A mix that is too loud gets turned down. Push a mix to -8 LUFS and most platforms play it about 6 dB quieter. You keep all the squashing and harshness the extra limiting put in, and you lose the loudness you were chasing. It arrives at the same level as a -14 mix, just sounding flatter.
A mix that is too quiet is not always turned up. Normalisation is built to turn loud uploads down, and you cannot rely on it to bring a quiet one up. Spotify, the one platform that documents this in detail, raises quiet tracks only as far as the peaks allow: its own example is a track at -20 LUFS with peaks at -5 dB, which is lifted only to -16 LUFS, so it still plays 2 dB quieter than everything around it. A quiet, unmastered mix sounds weaker than the mix before it in the feed, and listeners reach for the volume or skip.
This is not a rare problem. Of the more than 820 DJ mixes we measured on arrival between June and November 2026, nearly half came in quieter than -15 LUFS, and more than a quarter came in quieter than -18. The full figures are in what over 820 DJ mixes tell us about loudness. A mix mastered to -14 avoids both traps: it is not turned down, and it does not depend on a platform choosing to turn it up.
Why the peaks matter as much as the loudness
Every platform re-encodes your upload into its own streaming format. SoundCloud and Spotify both name the lossy formats they use, and both say the same thing: an encoder can push peaks slightly higher than they were in your file, and a peak that was sitting right at full scale can tip over into distortion on the way through.
That is why the advice is a ceiling 1 dB below full scale, and 2 dB on a louder master. The louder and denser the mix, the more the encoder has to work with, and the more room it needs. It is a small margin and you will not hear the difference in level, but you will hear the difference if it is missing.
Mixcloud: the platform without a published number
Mixcloud is the platform DJs ask about most, and it is the one with the least published detail. Its help centre lists the formats it accepts (WAV, AIFF, FLAC, AAC, OGG, M4A, MP2, MP3 and WMA), a 4 GB file size limit and a 30-second minimum, but nothing about loudness or playback level.
So the sensible approach is to treat Mixcloud like the platforms that do publish a target. A -14 LUFS master sits level with well-mastered shows on Mixcloud, it is the same file you can upload to SoundCloud and YouTube, and if Mixcloud ever does publish a target, -14 is overwhelmingly likely to be at or near it.
The 4 GB limit is worth knowing for long shows. A 16-bit WAV reaches 4 GB at roughly six and three-quarter hours. Anything longer goes up as a 320 kbps MP3, which comfortably fits a day-long stream.
One master or two?
For streaming platforms, one master is enough. -14 LUFS with peaks below -1 dB is correct for SoundCloud, Mixcloud, YouTube and Spotify, and harmless on Apple Music.
The exception is anything that plays without normalisation: a club PA, a USB stick in a CDJ, a car stereo. There a -14 master sounds noticeably quieter than the commercial tracks either side of it, so a separate, louder master is the right call. Keep both files and label them clearly, because a club master uploaded to SoundCloud gets turned down and loses its punch for nothing.
How to check your own mix
Measure the finished file before it goes anywhere. The free DJ Mix Analysis runs in your browser, reads the whole mix without uploading it, and reports its integrated loudness and peak level alongside dynamic range and stereo width. If the integrated figure is well away from -14, or the peaks are sitting at 0 dB, the mix needs mastering before it is uploaded.
If you would rather not do it by hand, the Streaming / Radio profile in SetMaster Pro masters to -14 LUFS integrated and holds the peaks 1 dB below full scale, which is exactly the target in this guide. The Club / Festival profile is mastered louder, for the systems that do not normalise, with the peaks still held below clipping. For more on choosing between them, see which mastering profile to use for your DJ mix, and for the background on the number itself, what LUFS means for a DJ.
Frequently asked questions
What LUFS should a DJ mix be for SoundCloud?
-14 LUFS integrated, with the peaks below -1 dB. That is SoundCloud's own published guidance. If your master is louder than -14 LUFS, SoundCloud recommends keeping the peaks below -2 dB, because louder masters are more likely to distort when they are re-encoded.
What LUFS should a mix be for Mixcloud?
Mixcloud does not publish a loudness target. -14 LUFS integrated with the peaks below -1 dB is the safe choice: it matches the platforms that do publish one, and it means the same file works on SoundCloud and YouTube.
Does YouTube turn up quiet mixes?
Do not rely on it. YouTube's normalisation turns louder uploads down to around -14 LUFS, and a mix that arrives well below that can play noticeably quieter than the properly mastered uploads around it. Mastering to -14 takes the question away.
Is louder better on streaming platforms?
No. A mix mastered louder than -14 LUFS is turned down on playback, so it ends up at the same level as a -14 mix but with more limiting, less punch and more risk of distortion after encoding.
Do I need a separate master for clubs?
Yes, if the mix will be played on a club system, a USB stick or anything else that does not normalise. Those play the file exactly as exported, so a louder club master is the right call there. Keep it off streaming platforms, where it is simply turned down.
